how to make a big bow with 2 ribbons

How to Make a Bow with Multiple Ribbons

Sharing is caring!

If you are a frequent follower of mine, you know that I am a ribbon addict! I can’t get enough of fabulous ribbon because ribbon just makes me so happy!! Therefore, I’ve been searching for a way to make a bow with multiple ribbons using only a few yards of each ribbon.  I saw this technique once at a floral show but only now have I mastered the technique to give it my flair. You see I had a customer request multiple bows with her wreath order but I forgot to purchase enough ribbon to make full bows.  So I started thinking of ways to use the ribbon matching her wreath but where I only needed a few yards and then remembered this technique.

Why I LOVE using this bow technique :

• Save money! If you want to make a bow using expensive ribbon use this technique to incorporate the ribbon into the bow and add less expensive ribbon as the other ribbon choices.
• Limited Supplies – If you only have a couple of yards of ribbon, you can still incorporate it into a bow.
• Whimsical Look – This bow technique is definitely a more modern look but you can use traditional colors or bow fabrics to freshen up any traditional décor to a more modern look.

 Video on How To Make a Bow With Multiple Ribbons

Notes/Tips :

If you have too much ribbon edge showing in the center, you can trim it with scissors.

I prefer my bows to have an odd number of loops; therefore, making the fourth ribbon tail short tricks the eye into thinking that there is another loop in the bow of that color but you can easily add another loop if you prefer.

Feel free to change the loop sizes to make a smaller or larger bow to work with your craft or décor need.

Feel free to add more ribbon making each ribbon layer 1” larger that the first.

Quick Reference to the above video :

Ribbon 1- 2.5” wide by 1 yd. 11” long (make 3 loops 5” long)

Ribbon 2- 1.5” wide by 1 yd. 28” long (make 4 loops 6” long)

Ribbon 3- 1.5” wide by 1 yd. 22” long (make 3 loops 7” long)

Ribbon 4- 2.5” wide by 1 yd. 17” long (make 3 loops 7” long)

Supplies used in the above video :

4 different ribbons, Scissors, Pipe cleaner

Written Steps to the above video :

Adding Ribbon #1

Vendors : I purchased this ribbon wholesale but I’ve seen it also at trendytree.com , craftoutlet.com and carolinapottery.com .

Where to Use This Bow : wreaths, garlands, Christmas Tree, home decor, gifts, etc. This technique may take a little practice to get the hang of but once you do, I’m sure you will love it just as much as I do!

If you have any questions, leave them in the comments below and I will try to help.

Please feel free to share this blog post and video.

Happy Wreathing,

If you enjoyed this post, you might also like…

How to Make a Christmas Wreath Bow (Video)

How to Make a Funky Bow

How to Make a Bow with Two Pieces of Ribbon

How to Hand Tie a Red Bow For Unity

24 Comments

How to do some wreaths

I have videos on making wreaths as well as 5 or 6 different wreath recipes in my ebook, http://www.learndecomeshwreaths.com

Thank You for showing us how to make your bows!

I purchased your learn deco mesh wreath e book, best thing I’ve purchased in a long time. Love the way you explain your way of designing. Your designs are beautiful. also appreciate your updates, it’s nice of you to keep on adding additional little tutorials, Many people once you buy from them they forget about you. It’s always a nice treat when I receive a email from you. Thanks for your crafting talents.

Yay, so happy you like the ebook Nina!

I have become a ribbon addict too!!!! In process of starting my business- A Lil Bit of Whimsy! Thanks for all the tutorial and etc! Laura

Great tutorial, thanks as always! This will come in handy as I am often trying to mix different ribbon and had previously finished each layer and then attached them to each other. Makes for a very bulky middle though – this makes perfect sense and I want to kick myself for not trying it sooner! 🙂

Glad you liked it Renee.

How much would you charge for this bow?

I would calculate the cost/expenses. Multiply it by 3. Add 20% labor and then if shipping any shipping charges (box, tapes, labels, etc.) This would be my retail cost. I purchased most of this ribbon wholesale.

Wondering if u have a tutorial video that shows how to make a ribbon wreath (no mesh) I saw one in a store here in San antonio Tx . The wreath had 4 different ribbons and they were loops attached to a 10 inch pencil wreath, shop owner did say u do not cut the ribbon until the very end after u trim the 4 tails. U also do not open the loops until u r completely done making the all the loops. Attempted to make one but I must be missing a step because my ties show even after I open the loops. They were not visible on the display. U could not see any part of the work wreath. Any suggestions will be appreciated.

I also love ribbon. My husband made me a ribbon shelf . I love it, to hold all my ribbon . But, it still would not hold all of them. Really like the multiple ribbon bow. Great for left over ribbon. Thank you for the video’s . Love watching all your video’s and seeing your work. All your wreaths are just lovely.

Dolly Farley Wreaths By Dolly

I have been a ribbon addict for years. I love the idea of using beautiful little bits of leftover ribbon mixed in with others in a multi ribbon bow.

Carol of Classystuff

I just wanted to let you know that your link to craftoutlet goes to a different site. I am starting my own crafting blog and saw your site. I love it! I just thought you would want to know that the link doesn’t work.

Dude….TY u so much for this tutorial video!!!!! I think I finally got it! This has made my day! I’m definitely subscribing to ur pg!

Blessings…..

What would happen if you used all2inch ribbon instead of the 11/2 ” ribbon?

It would be fine!

I have joined your club of the month for making wreaths and I thought bows, but I go back on your emails to retrieve how to tutorials and am not able to. How can I get your tutorials ?

Hey Lucy – All tutorials are available in the Wreath of the Month Club portal. We have them separated out by season, holiday, type, etc… if you need help logging into the portal please email us at [email protected] .

Great tutorial, thanks as always!

How can I join your class for ribbons, bows and wreath? I just saw the tutorial on this bow and can’t wait to try and make it. Please let me know….. Thank you Wanda Barnes [email protected]

Hey Wanda – Currently the Wreath of the Month Club is closed to new members but you can learn more and join the waitlist here: http://www.learntowreath.com

It’s so pretty. I can never get mine to come Out that good.

Leave a Comment Cancel Reply

• Search Search Please fill out this field.
• Manage Your Subscription
• Give a Gift Subscription
• Sweepstakes
• Holidays & Occasions
• Christmas Decor

How to Make a Bow with Ribbon

With our tips, you will finally master that intimidating bow made from ribbon. Make it yours!

Patricia Shannon gives how-to content a can-do attitude, sharing her knowledge and research on housekeeping, decorating, gardening, etiquette, beauty, and more. She has been writing and editing lifestyle content for more than a decade. 

• What You'll Need

Step 1: Create Bow Loops

Step 2: fasten the bow, step 3: fluff the bow, step 4: add the bow tails, how to make a bow with thick ribbon, how to make a bow with wired ribbon, how to make a big bow out of ribbon.

Don't let that big spool of ribbon and past Pinterest fails intimidate you. Follow our easy step-by-step guide and you'll learn how to make a bow with ribbon in no time.

What You'll Need

To start, make sure you have a few essentials on hand: scissors , chenille stems, and ribbon . If you're making large bows, plan to use two spools of ribbon per bow (more on that later). You'll also want to be sure to have a clear idea of how big or small you want your final bow. Also, keep in mind just how far that spool of ribbon will get you based on the intended size of your completed bow.

We tend to think fuller is always better—so, if you're going to battle on whether to make it big or make it full, opt for a more conservative size in order to maximize fullness. These directions should work with just about any variety of ribbon, though you'll have less trouble keeping shape if you opt for wired ribbon.

Our step-by-step bow guide is simple and results in a perky, rounded shape that attaches easily to gifts, treetops, garlands, wreaths, and more. Use longer or shorter pieces of ribbon to adjust the size of the bow. It's easiest to form the first loop before cutting the ribbon from the spool. The size and thickness of your loop will determine the size of your bow.

Start with a spool of ribbon of your choice. Remove the ribbon from the spool, then start looping the ribbon around to create a circle. The size of the circle with roughly be the size of your finished bow. The more times you're able to loop the ribbon around, the fuller your bow will end up, so opt for at least three full circles. Just remember: More is always better (not to mention easier to work with).

Cinch the loop in the middle with a length of twine or a chenille stem.

Once you're satisfied with your loops—or have reached the end of your ribbon—pinch the center so each side is a loop of equal size. Use a chenille stem to fasten. What you should have at this point is a flat figure-8 type bow. Don't be discouraged, it will start to come to life in Step 3.

Begin to pull individual bow loops out from the center, alternating pulls from each end.

To fluff the bow, pull one loop out from the center of the bow. Wire ribbon will allow you to mold the loop to create a rounded shape. Next, pull a loop out from the other side of the bow and, once again, mold the loop to create a rounded shape. Repeat this process, alternating sides with each pull, until all the loops have been pulled out and fluffed. At this point, you should have a nice shape—all that's missing are the tails.

Once all the loops are formed, tie a long piece of ribbon around the center to make the tails of the bow.

This is where your second spool of ribbon comes in. Tie a long trail of ribbon around the center of the bow, being sure to cover the chenille stems from view. If you'll be fixing the bow to a tree, wreath, etc., you can opt to leave out the ends of the chenille stems to help attach the bow. Let the tails trail down to the desired length. To finish, snip each ribbon end at a diagonal. Whatever you do, don't leave those blunt ends—you've come too far.

If you're making a bow out of ribbon that is particularly thick, be sure to adjust the size of your loops accordingly. If you make them too tight, you'll have a hard time getting your bow to look like anything other than a round puff. Don't be afraid to start over if you realize you need to make your bow larger or smaller. The beauty of our process is that nothing is cut until the very end, once you've inspected your bow from all sides and are pleased with the size and shape.

As we mentioned at the start of this tutorial, it's best to make a bow with wired ribbon as it helps the final product hold shape much better than other varieties. Satin ribbon is particularly difficult to work with when creating anything other than a petite, flat bow. If you just returned home from the store and realized you inadvertently picked up a spool of wired ribbon, consider it a happy mistake. You're on your way to creating our 4-step bow with ease.

For a Christmas Tree:

If you're looking for a giant bow to place atop your Christmas spruce, you'll just want to double the process above to create a fuller effect. It's as simple as creating one more bow following the same exact steps (1 through 4) listed above. When your bows are complete, attach one in front and the other behind the top stem of the tree. Now you've created a Christmas tree topper that dazzles from every angle.

For a (Really Big) Gift:

The trick to making your bow bigger is to simply buy a longer spool in order to create bigger loops. To ensure you don't lose any of the fullness that a smaller bow would produce, you should try to find a thicker ribbon as well and even create more loops than you would with a more petite version, so it still fills out nicely. Again, wire ribbon is the best route, particularly if you want to take your bow making skills to new heights. Oh, and if you're hoping to make a bow big enough to fit that new car you're getting her for Christmas, you should probably just go ahead and pick that up on Amazon. This one is Prime eligible and will only set you back around $20—far less than all that ribbon (and patience) a homemade version would likely require.

By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

The Everyday Home

By Barb 13 Comments

How to Make an Easy Double-Ribbon Bow

Filed Under: craft projects , crafts , Crafts , Design , Everyday Crafts , Everyday DIY , Floral Design Tutorial , Floral Project , Holidays , No-Sew Projects , Projects , Projects Page , Valentines , Valentines Day , wreaths Tagged With: Bathroom Decor , Floral , Floral Projects , Holidays , No-Sew , Ribbon , Valentines , Wreaths

I am going to start out this post with a disclaimer.   I am not a professional bow-maker.   I do not have any degrees in bow-making.  I don’t even have any little letters behind my name such as  PBMA (Professional Bow Makers of America).   But, I’ve been making bows for as long as I can remember.  It takes practice. Even a non-professional bow-maker like myself has  some difficult times when working with larger ribbons.  That said… I decided to share with you a little technique to create the look  of large, double-ribbon bows.  It’s so easy – you, too, may  one  day become  a member of PBMA.  

I am taking part in another  No-Sew Decorating Showcase  with some of my “favoritest” Bloggers.  I will share their Projects and links below, so please make sure you  visit each one for some amazing No-Sew Projects.

Before we get started…let me apologize for the overload of pics.   But, I wanted to make sure I presented you with a thorough tutorial.   So sit back and relax…this may take a while. 

My wreath was inspired by these cute, wood plaques.  They were regularly $2.49 on sale half price.  I found some ribbon which coordinated, but wasn’t so Valentine-specific.  Let’s start making a bow…

— Step One —

For a larger bow, I like to use about 3 yards of ribbon.  At one end, I create a small loop and hold it with my thumb.  This will create the center loop of the bow.

— Step Two —

Twist the tail of the ribbon, and again, hold it secure with  your thumb.   

— Step Three —

Now, it’s just a matter of creating a loop and twisting the tail behind  it –  creating a loop and twisting the tail behind it… etc.

— Step Four —

When you create a loop and twist, this allows you to create a loop on the opposite side. 

— Step Five —

Try to mirror the loops on each side…i.e. 4 and 4 – or 5 and 5, etc.   Also, try to keep the first row (or layer) of loops the same length.

— Step Six —

Continue to make loops and then twist, but lengthen your loops to create  a “second” row or layer.  You can add as many loops as you desire to get the fullness and  size  of bow you need.   Keep in mind, you will be adding another layer  with  the coordinating ribbon.  Your bow should look something like this…

At this stage, I will attach it to the wreath before adding the second layer of ribbon.

— Step Seven —

For the second ribbon, the plaid, I am not going to make a traditional “bow” to add to the polka dot bow.  Rather, I am going to show you  how to make loops and  add them so it appears that you’ve intertwined  two ribbons into one,  large luscious bow.  Cut about six 12″ lengths of ribbon and double them…

I have shared with you before one of my floral secrets…   wood skewers from the Dollar Store.  Skewers are a good way to insert and attach objects to wreaths  so they do not have to be permanently attached.   It’s the “recycler” in me.   Cut a length of skewer and a small length of floral wire.  Place the piece of skewer around the tips of the ribbon, and wrap with the  wire – as seen above. I used six plaid loops for my bow.

— Step Eight —

Now you simply start adding the loops to the original bow.  The skewers make it easy to poke the loops right in.  Once you have added all the secondary loops you want, your bow should look like this.

But, we’re not thru. Oh no, oh no. 

— Step Nine —

Create about three “mini” loops.  Use the same method as I showed for creating the secondary loops,  but instead of a 12″ length of ribbon use about 6″.

Tuck the mini loops into the center of the bow.  Now it truly looks like you combined two separate ribbons when  creating your bow.

— Step Ten —

I create “tails” for my bows separately by using the same skewer and wire method.  This allows you more control over the placement,  versus when its attached to the bow.   I added a few silks that coordinated with the ribbons and the little wood hearts.  I also glued wire onto the back of the wood hearts  so again, they could be easily removed.

This project took about 45 minutes all together.   That included adding a few touches to the Valentine Vignette   in the foyer.

Remember the Mason Jar filled with pink and white roses?

Here’s my little secret for extending out the life and use of roses when they start to fade away…

Pull off as many browned or wilted petals as possible. Cut the stems  really  short (about 3-4″),  and bundle them in a tight bouquet.   Then, place them in a container with a smaller opening which keeps the tight bundle held together.

Finally, a candle is added to a white teacup full of Valentine Candy hearts.

And it all ties together for a cute   Sweet{heart} Vignette .

Thank you for letting me share my Bow-Making Project with you.

Before you go, please make sure you visit my friends…

Amy at Atta Girl Says

Ribbon Heart Cocktail Napkins

Ann at On Sutton Place

DIY Anthroplogie-Inspired Heart Collector Pillow

Debbie at Confessions of a Plate Addict  

No-Sew Faux Cross Stitch Valentine Tea Towels

Yvonne at Stone Gable  

No-Sew Burlap Posy Pillow

Suzy at Worthing Court

No-Sew/No-Knit Cup Cozies

I would LOVE you if you would pin this to your favorite

Pinterest Board…

Join me this week for:

Tuesday : The Scoop Linky Party 

(goes live Monday night at 6pm)

Wednesday : “Ideas for a Bridal Shower”

with Pinterest and Hometalk

Friday: Farmhouse Friday

“Great Farmhouse Porches”

Delivered by FeedBurner

February 9, 2014 at 6:42 PM

Such a pretty wreath, Barb! I love those giant candy hearts! Hugs…Debbie

December 7, 2014 at 2:48 PM

but how do you hold the first bow together to attach it to the wreath without it all falling apart??

February 9, 2014 at 6:55 PM

Barb, What a great tutorial. I make my bows like you did the first one… but I never thought of adding more loops. What a fabulous idea! I’m so glad your shared this secret with us! My bows will certainly be better looking from now on! Wonderful and easy to understand instructions! Thanks so much!

February 9, 2014 at 7:19 PM

I never knew how to add the second set of loops! Brilliant. Great photos and directions.

February 10, 2014 at 7:19 AM

Your bow looks amazing! Thanks for the great tutorial!

February 10, 2014 at 7:38 AM

Nice tutorial Barb! Your wreath turned out so cute!

February 10, 2014 at 8:51 AM

Such a beautiful bow that could be used for many occasions . . Valentines, Easter, Birthdays…beautiful wreath!

February 11, 2014 at 11:18 AM

I struggle to make bows, so I am definitely pinning and bookmarking this tutorial. I usually just run next door and ask my neighbor to do it for me, but now I think I can do it myself. (Girl, I even own a Bowdabara and haven’t been able to create a bow that I truly love. But now I know your secrets. Thanks for sharing.)

February 23, 2014 at 4:13 AM

I just wanted to add that you can make a two tone bow by putting the two ribbons together and making the bow just like you did the first part of your bow. No extra time or equipment necessary. 🙂 Thanks for sharing all of your ideas. Love your site!

February 23, 2014 at 9:49 AM

Yes, you can make a bow with two ribbons, but if you’ve never made many bows this is a much simpler technique. Thanks for stopping by.

February 23, 2014 at 9:00 PM

I missed this post, Barb. What a great tutorial. I have never been very good at making bows but I am going to give your way a try. You make GREAT ones! xo Diana

March 4, 2014 at 2:25 PM

Thank you so much, this is a much easier way. Great tip! Thanks for shaRING

January 7, 2017 at 12:29 AM

I do not know if it’s just me or if everybody else encountering issues with your website. It looks like some of the written text on your posts are running off the screen. Can someone else please provide feedback and let me know if this is happening to them as well? This may be a issue with my web browser because I’ve had this happen previously. Cheers

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Merry Christmas 2017

One of my favorite things to do is decorate my door for the holidays.  Wreaths are always great to dress up a door, and sometimes simple wreaths are the best.  A nice touch to a simple wreath is a big bow.  It’s one of the things I love to attach to a wreath.  I have been making these bows for a long time and thought I’d share with you how to make a big double bow for a wreath.  Or really any place in your home.

The supplies you need are simple.  2 different sizes/designs of wire edged ribbon (I used about 12 ft. of each ribbon for this bow) and a pipe cleaner or two.

The first thing you do is lay the smaller ribbon on top of the larger ribbon.  Make the center of your bow by creating a small loop. Keep your thumb inside the loop, holding down the end of your ribbon as you make the rest of the bow.

From that center loop, create a bigger loop on each side .  Going back and forth while holding the center together.

Here’s the main thing to remember. Since we are using 2 ribbons, you will have to twist the ribbon at the center of the bow, as you begin to make the loops on each side. Making sure that the smaller ribbon is always on the top of the larger ribbon.

I make 4 loops on each side.  I try to make them all the same size, but sometimes that doesn’t work and that is why we love the wire edge on the ribbon.  To finish off the bow create one large loop that goes down and will loop back up to the bow.

Gather the middle of the bow together, insert the pipe cleaner into the center loop and pull it back gathering all the other loops.  Tighten the center of the bow and twist the pipe cleaner together.  Just trim off the end of the ribbon.

Then you can fluff the bow and spread out the loops to get a look that you like.  You also want to decide how long you want your tails to hang and cut them to the desired length.

Then add it to your wreath! Or your mantel or your tree.  You know, wherever you need a big beautiful bow.  Perfect!

I’ve also got a video tutorial showing you all the steps on how to make a double ribbon bow.

What Ribbon To Use For A Double Ribbon Bow

I think that one of the hardest parts about making a double ribbon bow is deciding what ribbons to use.  I say, use whatever ribbon you like or that matches your decor.  As long as you like it, I think that’s what matters.

But in case you’re not sure which ribbons would look good together, I put together a couple ideas below of what ribbons you could choose when making your bow.  I found all of these ribbons at Michaels in case you wanted to see if you could find the same.  And they are all 2 different sizes.  That is what I like for a double ribbon bow.  But you could always choose 2 of the same size ribbon if you like that look too.

Even though I’ve been making these kinds of bows for years, they never turn out 100% perfect.  My loops are rarely the same length, but a lot of the mistakes can be hidden if you use the right kind of ribbon.  It also takes a lot of practice, so don’t give up if your first try isn’t perfect! 🙂  Thinner ribbon can be a little easier to handle too.

Only wanting to make a single ribbon bow?  You can get the tutorial along with printable instructions on the post How to Make a Big Bow for a Wreath .

Now that you know how to make a big bow, where are you going to put it?

Happy Crafting!

Here are some of the bows I’ve made in the past and how I’ve used them.

How to Make a Burlap Wreath

Gift Wrapped Front Door

How to Make a Large Double-Ribbon Wreath Bow (Easy DIY Tutorial)

Learn how to make a large, wired, double-ribbon wreath bow step-by-step with this free and easy DIY tutorial. Add the bow to a wreath, a mantel, or a tree. To make a single bow, check out this big bow tutorial .

Bow materials

• Large wire-edged ribbon design of your choice (12 feet)
• Small wire-edged ribbon design of your choice (12 feet)
• Basic wreath of your choice
• Pipe cleaner

Instructions

• Decide what design combination to use for a double ribbon bow.*
• Lay the smaller ribbon on top of the larger ribbon.  
• Make the center of your bow by creating a small loop.
• Keep your thumb inside the loop, holding down the end of your ribbon as you make the rest of the bow.
• From that center loop, create a bigger loop on each side, going back and forth while holding the center.**
• Make 4 loops on each side of equal size.
• Create one large loop that goes down and loops back up to finish tying the bow.
• Gather the middle of the bow together, and insert the pipe cleaner into the center loop. Pull it back to gather all the other loops.  
• Tighten the center of the bow and twist the pipe cleaner together.
• Trim off the end of the ribbon.
• Fluff the bow and spread out the loops to get a look that you like. 
• Decide how long you want your tails to hang and cut them to the desired length.***

*Use whatever ribbon you like or that matches your decor.  As long as you like it, I think that’s what matters. In case you’re not sure which ribbons would look good together, I put together a couple ideas below of what ribbons you could choose when making your bow.  I found all of these ribbons at Michaels in case you wanted to see if you could find the same.  And they are all 2 different sizes.  That is what I like for a double ribbon bow.  But you could always choose 2 of the same size ribbon if you like that look too.

**Since we are using 2 ribbons, you will have to twist the ribbon at the center of the bow, as you begin to make the loops on each side to make sure the smaller ribbon is always on the top of the larger ribbon

***Even though I’ve been making these kinds of bows for years, they never turn out 100% perfect.  My loops are rarely the same length, but a lot of the mistakes can be hidden if you use the right kind of ribbon.  It also takes a lot of practice, so don’t give up if your first try isn’t perfect!   Thinner ribbon can be a little easier to handle too.

Related Posts

• How to Make a Big Bow for a Wreath
• How to make a Burlap Wreath
• Ribbon Sandwiches
• Summer Wreath
• How to Make an Easy Ribbon Banner
• Easy Christmas Wreath
• No Sew Minnie Bow
• Easy Fall Wreath
• Graduation Money Ribbons
• DIY Valentine Rag Wreaths For Double Front Door
• Harvest Wreath
• DIY Skull Wreath

Article Info

Popular posts.

Owner at Liz on Call

• Holiday Crafts
• Happily Ever After Cut File
• Free Circus Cut Files
• How To Draw A Pumpkin Free Printable
• Got Candy Halloween SVG File
• School Fuel Tumbler SVG
• Free Teacher SVG Files
• DIY Nightmare Before Christmas Shirts
• Summer Craft Ideas for Kids
• DIY Tissue Paper Flower Tutorial Teacher Appreciation
• Drop The Hammer Cut File | DIY Thor Shirt
• Dyed Pasta Bracelet and Necklace
• Color the Rainbow

Reader Interactions

Leave a reply cancel reply, comments & reviews.

March 8, 2023

Hi Liz! I love this bow making technique! Thank you for sharing. However, neither of the two ribbons I chose for my wreath have wire. Can you recommend something to use to stiffen my ribbon? I was thinking Modgepodge?? Thank you,

March 9, 2023

I have never used mod podge on a bow before. I am not sure how it would go.

September 15, 2022

I have always struggled with making bows for anything. This video helped me out so much. Thank you for having it!!!!

September 21, 2022

I’m so glad you found it helpful.

December 16, 2019

This is by far the best and easiest tutorial for making a bow that I have seen! Thank you for making this!

December 17, 2019

Wow! Thank you so much. I was hoping people would find it helpful. 🙂

Join The Email Club!

Connect with.

Hey On Callers, subscribe for awesome freebies, fun ideas and latest news.

• Skip to primary navigation
• Skip to main content
• Skip to primary sidebar

How to Make a Ribbon Bow - EASIEST Bow Tutorial

Sharing is caring!

Learn how to make a ribbon bow. Ribbon Bows look great on hair clips, DIY gift bags , clothing and all kinds of fun homemade presents. They are so fun and easy to make you will wonder why you didn't learn how to make them years ago!

• How to Make a Ribbon Bow

I always find it relaxing to sit in front of the tv in the evenings and make hair clips with my glue gun. In making these samples to show you, it took longer for my glue gun to heat up than to make the actual bows. Don't worry if you don't have a glue gun. A simple needle and thread are all you really need to learn how to make a ribbon bow.

How to Make a Ribbon Bow - SUPPLIES

Supplies you will need:

• Cut 2 pieces of ribbon 7 inches (17.7cm) each.
• 2 inches of ⅜ inch (10mm) wide ribbon for the center.
• OPTIONAL - Hot glue gun. If you are joining these bows to hairclips it is easier to make them with a hot glue gun. If you will be joining your bows to clothing that needs to be washed, you should skip the glue gun and do all hand sewing.
• NEEDLE - Hand sewing needle.
• THREAD - I always like to use upholstery thread as you can pull it really hard and it won't snap.

How to Make a Ribbon Bow - Video

Here is a video I made for you showing how to make a ribbon bow . It is just a few minutes long, so please enjoy! Make sure you subscribe to my YouTube channel for weekly sewing and craft videos.

How to Make a Ribbon Bow - Instructions

Step 1 - overlap ends.

Take one of your wider 7 inch (38mm) pieces of ribbon and fold the ends in so they overlap in the middle by ¼ inch (6mm). Pin it in place.

 Step 2 - Stitch Through Center

Thread your needle and knot the end. Make small running stitches through the center of the ribbon ensuring you catch in all layers. Don't cut your thread.

Step 3 - Pull Tight

Pull the thread tight and arrange the folds carefully with your fingers. Use the tail of the thread to wrap around the center of the bow a few times and pull really tight.

Knot off the thread at the back.

Step 4 - Repeat

Repeat the above steps for the second piece of wide ribbon. You now have 2 lovely looking bows!

Step 5 - Join the Bows

The next step in how to make a ribbon bow is to join the bows. Place one bow on top of the other bow aligning their centers. Use your thread and wrap it around the center of the two bows. Knot it off at the back.

Try and be accurate when winding the thread around the center as you will end up with a more symmetrical bow. If you are going to be joining your bow to clothing don't cut the thread yet. For hairclips or articles that don't need washing, you can cut the thread.

Step 6 - Glue The Center

Place your thin strip of ribbon for the center down on the table. If the ribbon has a one-sided pattern, then place it pattern side down.

Place your bow on top. Do a quick check and see if one side of your bow looks better than the other. Put the nicer side facing down.

Wrap the small ribbon tightly around the center of the bow. You want it to overlap by about ⅜ inch (1cm) at the back. Trim it a little shorter if necessary.

Then either stitch or glue the ends.

Turn your bow over and you are all ready to join it on to something like an alligator clip or a gift bag.

Ribbon Bow Projects

Check out this free gift bag tutorial which includes a printable template. You can also glue your bow to lined alligator clips .

Now you have learned how to make a ribbon bow please share below what you will be adding it on to. 

More Bows and Ribbons

• How to Stop Ribbon from Fraying
• Felt Bow Template
• How to Make Fabric Hair Accessories
• DIY How to Make Fabric Bows
• DIY Fabric Bow for Clothing  (Large bow)
• DIY Hair Ties: Bow Hairbands 
• DIY Felt Bow
• How to Sew Ribbon

PIN IMAGE FOR LATER 🙂

More Free Sewing Patterns & Tutorials

Reader Interactions

May 25, 2019 at 4:21 pm

Thanks for the instructions, I can sit on my bed and work nd watch TV

January 10, 2019 at 3:26 am

Thank you for this. Am adding bows to base of straight maxi under dress. The base will show bows will appear to hold swags of material between.

Leave a Reply

Your email address will not be published. Required fields are marked *

Blessed Beyond Words

A Christian Mom's Guide to Life with a Large Family

How to Make a Large Bow (Tutorial)

December 8, 2012 By Angie Vinez 6 Comments

I will start out this post by warning you that this post will be loaded with pictures, so it may take some time to load. But, I want to give you step-by-step instructions to make it even easier for you.

Ok! Let’s get started! The instructions will be posted above each picture.

Materials Needed:

Large Roll of Wired Ribbon (I used 2″ x 75′. This will make quite a few bows.) Florist Wire (Silver is best, all my Walmart had was green.) Wire Cutters (optional. Mine are also tweezers, and I use them to twist the wire tighter around the ribbon.)

Instructions:

1. Decide how long you want the “tail” of your bow. (I always tend to make mine longer than I should – it’s easier to cut off more at the end than it is to start all over because it’s too short.)

2. Make your first loop. (This will determine how big your bow is. The larger the loop, the larger the bow.) Pinch the ribbon together at the end of the loop.

3. Make your second loop on the opposite side. Continue pinching the ribbon together in the middle.

4. Continue until you have as many loops as you’d like. (For this bow, I wanted 8 loops.)

5. Cut a long piece of wire, and then fold it in half for extra stability.

6. Wrap the wire around the area you’ve been pinching all this time. (Use wire cutters/tweezers to get the wire twisted as tightly as possible.) Do NOT cut the excess wire. You’ll need it in a minute.

7. To form the little center loop, use ribbon from the side of the ribbon you haven’t cut yet and make a small loop.

8. Use the extra wire that’s still on the bow and wrap it through the smaller loop to secure the loop to the rest of the bow.

9.  Secure with extra wire. (Optional: I do this if I know I will be putting the bow somewhere that it will be taking a lot of abuse – on an outdoor wreath, on a package, etc.)

10. “Floof” the loops and shape them exactly how you want them.

11. Cut the second tail from the roll of ribbon at the same length as the first tail. Then, cut each tail at an angle as shown below to make an upside down V shape. Repeat for each side. (To ensure they are exactly the same, you can put both tails together and cut at the same time.)

Tada! You have a finished bow!

These bows can be used on just about anything… gifts, wreaths, doors, you name it. Tomorrow I’ll share a fun wreath project that needs a pretty bow like this.

You can easily make a bow in under 5 minutes. Now all my friends know my secret, and they know why I have so many bows all over my living room. 🙂

I’d love to see your finished bows if you use this tutorial!

Angie is a wife and mother to 8. Her life revolves around cooking, cleaning, laundry, and other household duties. She is passionate about her life in Christ and wants to encourage other mothers in their own walk of faith. Angie is active on many social media networks, loves technology, photography, and graphic design, and loves creating blog designs for other mom bloggers.

About Angie Vinez

December 9, 2012 at 12:05 am

Beautiful!!! I think I can make one of those. Your timing is perfect I just bought a roll of snowmen ribbon!!

December 9, 2012 at 10:36 pm

Yay!! 🙂 Let me know how it turns out. 🙂

June 11, 2017 at 10:57 pm

Going by you’re Tutorial I may be able to make a bow ! Thank You

June 14, 2017 at 10:58 pm

Let me know how it works for you!!

September 15, 2017 at 10:37 pm

Excellent tutorial!! I’m going to give it a try!

[…] Needed Christmas Bow (see my “How to Make a Large Bow” post.) Wreath (I got mine from Walmart for $2.50. It’s 20 inches.) Ornaments of different […]

Leave a Reply Cancel reply

• Skip to primary navigation
• Skip to main content
• Skip to primary sidebar

• Crochet Patterns
• Sewing Patterns
• DIY Projects
• Pallet Projects
• Home & Garden
• Home Organization
• Kids Crafts
• Fashion & Beauty
• DIY Cat Projects
• DIY Dog Projects
• DIY Wedding Projects
• Jewelry Making Ideas
• Inspiration
• Parenting Tips

15 Easy Ways to Make a Bow with Ribbon – DIY Ribbon Bow

If you’re looking for a quick and easy way to add a touch of elegance to your gift-giving , look no further than ribbon bows! There are countless ways to make a ribbon bow, but we’ve gathered 15 of our favorite diy ribbon bow ideas for you here. So whether you’re looking for something simple diy ribbon bow or something more intricate, we’ve got you covered. Keep reading learn how to make a bow with ribbon below!

From simple DIY bows that are perfect for beginners to more complex ribbon bows that are perfect for special occasions, there is sure to be a bow here that will suit your needs. So without further ado, let’s get started!

How to Make a Ribbon Bow:

From the many crafting techniques, one should know to make the bows himself as they are abundantly used in the crafts. Now you can easily learn to make the cute bows out of the ribbon because we have brought to you the tutorial here cakejournal

DIY Boutique Hair Bow Tutorial:

One of the most adored hair accessories by the girls includes the pretty ribbon bows especially inspired from the frozen. Now you can cheaply make some at home using some cutely colorful ribbon and let your kids have some fancy hairdos. Learn the boutique style hair bow making here poofycheeks

No-Sew Ribbon Bows with Joann Ribbon:

From hairbands to dresses, shoes, and gifts the pretty and colorful bows are used so nicely. So you better be good at the skill of making ribbon bows so that you can use them around in your crafting fun. Here is a simple no-sew ribbon bow making idea to get your hands on so do get it. karametta

DIY Classic Ribbon Bow in 4 Easy Steps:

It looks like everyone can make a bow anytime they want but it’s not true. You need some basic knowledge and understanding of ribbon bow making. Here is the idea of a DIY classic ribbon bow that is easy and fun to make in just 4 easy steps. Once you go through and practice you can achieve it. bhg

Make a Bow Out of Ribbon:

Ribbons are frequently used in the crafts especially when they relate to the decor department. So you better be good at making bows to use them for your lovely projects. Ribbons are the perfect material to use for the bow making and that too in any of your favorite hues. The method has been shared here cleanandscents

There are many things which bring in the use of bows to look complete in their decor or styling. So if you are making a wreath or decorating a tree you would need a bow to charm up the look. You can now easily shape up a bow in your desired hues and here is the tutorial of its how to. inmyownstyle

Easy DIY Giant Decorative Bow:

These giant bows are going to create a huge impact in your festive decor for their so catchy and cool look. One is made out of a simple and plain ribbon and the other is from a stripy styled ribbon and together they look just so tempting and fun. Follow the details of these giant bows making here instructables

DIY Tulle and Ribbon Scrap Bows:

The little girls look more adorable when they wear pretty and colorful bows on their hair that matches their dress. Now you can easily and quickly make this gorgeous and cute hair bow them using the ribbons from scrap and some tulle. Either open hair or a tail the bow would suit both hairstyles. Details here sixsistersstuff

Make a Perfect No-Sew Ribbon Bow:

Add oodles of charm to a gift wrap by decorating it up with this gorgeous handmade no-sew ribbon bow. The jute twine and some faux greenery look good on a gift wrap but the addition of this ribbon bow just steals the show. Learn to make it here cassiescroggins

Big Loopy Bow with One Ribbon:

Women love making those cute ribbon bows and adorn things with them. It’s time to up the game for the bow making fun and creating this big loopy bow. Using a pegboard and some wooden dowel pieces you can create the bow-making device and then easily make this flowery-shaped loopy bow. Tutorial here trendytree

Make a Wreath Bow Out of Ribbon:

A season is not welcomed enough when you do not have a complimentary wreath hanging on your doors. You can easily make one at home with a wreath ring, some seasonal leaves, and a bow to charm it up more. This gorgeous wide ribbon bow in loopy style is perfect to adorn a wreath. Details here design-fixation

How to Tie a Perfect Bow with Ribbon:

It’s like the tradition of gifting to tie a bow on the gift wrap. So you better be good at making the bow ties as you need them so frequently. Using the ribbons you can easily tie a bow to your gifts in just a few simple steps. Learn the details here hellolittlehome

Easy to Make Multi Ribbon Bow:

Once you are a pro at making of pretty and cute ribbon bows you can really elevate the level of your home decor. Here is this multi ribbon bow that looks so interesting and unique to use on your wreaths and other floral arrangements for the home decor. The ribbons are different in colors, style, and their textures to look just extraordinary. mamadaresto

DIY Boutique Style Hair Bows:

Why should we waste money on the things which are easy to make at home just like these pretty bows. These DIY boutique style hair bows are so easy to make and charm up the wardrobe of your girls. You can customize the hair bows by choosing the ribbons of the colors that suit or match their dresses. Details here midwestern

How to Make a Bow Out of Ribbon:

A gift does not look like a gift until you tie a gorgeous and fluffy ribbon bow on it. This biggie bow looks as awesome on a gift with a red wrap as it has red and white strips to compliment the gift decor. The bow is so easy and fun to make and you can get your hands on its how to right here skiptomylou

What’s the easiest way to make a bow? With ribbon, of course!

Ribbon bows are simple to make and can be used for all sorts of occasions. Here’s a step-by-step guide on how to make a bow with ribbon:

1. Cut a piece of ribbon that is about 18 inches long.

2. Fold the ribbon in half so that the two ends are even.

3. Take the right end and cross it over the left end.

4. Take the left end and cross it over the right end.

5. Now, take the top of the left end and tuck it under the crossed strands of ribbon.

6. Hold on to the ends of the folded ribbon and pull tight. You’ve now created a bow!

7. If desired, you can add a dab of hot glue to the back of the bow to keep it in place.

There you have it – a simple and elegant ribbon bow! This is a great way to dress up any gift or package. You can also use ribbon bows to embellish hair clips, headbands, or other accessories. With just a little bit of practice, you’ll be able to create beautiful bows in no time!

Conclusion:

There are many ways to make a bow out of ribbon. It can be a fun project to do with children or grandchildren, or simply to add a touch of elegance to a gift. No matter what the occasion, a DIY ribbon bow is sure to please. Thanks for reading!

We've been independently researching and testing products for over 120 years. If you buy through our links, we may earn a commission. Learn more about our review process.

3 Easy Ways to Make a Bow for a Wreath or Present

It's the perfect beginner DIY craft for this holiday season!

If you’re looking for a fun DIY activity to add to your list, learning how to make a bow is a great addition. Not only do they add flare to home and package decorations, but they’re easy crafts for any DIY beginner .

With these simple steps, we’re showing you how to make three types of bows: a simple twist bow, a double looped bow and a bouquet bow (perfect for newbies and pros alike). Watch the video above to get all the step-by-step visuals you need

How to Make a Simple Twist Bow (Perfect for a Present)

What You'll Need:

• 2.5-inch wide ribbon
• Pipe cleaner

Instructions:

• Make a Loop: Unroll another 8 inches of the ribbon, pinch it in place and fold it in half to create your first loop.

• Another loop: Unroll another 8 inches of your ribbon, pinch it and fold it in half to connect with the others.

How to Make a Double Looped Bow (Great for a Wreath)

• Two 14-inch pieces of 2.5-inch wide ribbon
• One 12-inch piece of 2.5-inch wide ribbon
• One 6-inch piece of 2.5-inch wide ribbon
• Hot glue gun
• Create a Loop: Hot glue the edges of your 12-inch and 14-inch ribbon to create two loops.
• Glue Them Together: Add a drop of glue to the middle of your larger loop before placing the smaller one on top.
• Accordion Fold: Place your other 14-inch ribbon underneath your glued loops and pinch them together in the middle.
• Secure Your Bow: Wrap and twist the pipe cleaner over the folded parts in the middle to keep all of the pieces together.

How to Make a Bouquet Bow (For Either a Wreath or Present)

• Three 20-inch pieces of 2.5-inch wide ribbon
• Three 20-inch pieces of 2.5-inch wide ribbon in a different pattern
• Three 20-inch pieces of 1.5-inch wide ribbon
• Make a Loop: Take one of the ribbons and measure down 12 inches. Hold the spot in place before folding your ribbon in half to create a loop.
• Repeat and Combine: Follow the first step for all of your ribbons and accordion fold them together. Keep your thumb in the middle to hold all of the ribbons together.
• Add a Bit of Fluff: Move your pieces around and fluff them up to create your desired look.
• Keep Them Secure: Wrap the zip tie around the middle pieces to keep your ribbons together.
• Trim: Remove part of the zip tie so it doesn’t stick out.

Tip: Cut the ends of your ribbons diagonally or in A.V. for a different look. You can also cover the pipe cleaner with pieces of excess ribbon for a cleaner look.

Mariah Thomas (she/her) is an assistant editor for Good Housekeeping , where she covers home and lifestyle content. Mariah has more than four years of editorial experience, having written for TLC, Apartment Therapy, Women's Health and Avocado Magazine . She received her master's degree in journalism at the Craig Newmark Graduate School of Journalism and published her first book, Heart and Soul: Poems of Thoughts and Emotions , in 2019. She's also the founder of RTF Community , a platform for creatives of color to connect, learn and showcase their work. 

@media(max-width: 64rem){.css-1yxmhzw:before{background-repeat:no-repeat;bottom:-0.2rem;color:#ffffff;content:'_';display:inline-block;height:1.25rem;line-height:1;margin-bottom:0.5rem;margin-right:0.625rem;position:relative;width:1.25rem;}.loaded .css-1yxmhzw:before{background-image:url(/_assets/design-tokens/goodhousekeeping/static/images/Clover.5c7a1a0.svg);}}@media(min-width: 48rem){.loaded .css-1yxmhzw:before{background-image:url(/_assets/design-tokens/goodhousekeeping/static/images/Clover.5c7a1a0.svg);}} Christmas Ideas 2023

Wine Advent Calendars That Bring All the Cheer

21 Best Beauty Advent Calendars

7 Best Sex Toy Advent Calendars

The Best Christmas Tree Stands of 2023

53 Best Christmas Rom-Coms

The Best Kids' Christmas Movies of All-Time

155 Festive Christmas Instagram Captions

12 Best Christmas Trees for Your Small Apartment

35 Things You Didn't Know About 'White Christmas'

The Best Advent Calendars for Teens

The Best Christmas Movies of All Time

• Bowdabra Mega Kits
• Patriotic Ribbon
• Spring/Summer
• St Patrick’s day
• Burlap/Linen
• Christmas/Holiday
• Plaid/Checks
• Bowdabra Bow Making Tools
• Bowdabra Ebooks
• Bowdabra Blog
• Bowdabra Bow Making & Design Tool – Large – BOW1003
• Mini Bowdabra Bow Making & Design Tool – Small – BOW2100
• Bowdabra Hair Bow Tool and Ruler Kit – BOW2200
• Bowdabra Complete Hair Bow Creator Kit – BOW2300
• How to Make a Bow
• With Bowdabra Bow Making Tool
• With Mini Bowdabra Bow Making Tool
• Mini Bowdabra Hair Bow Tool and Ruler Kit
• Mini Bowdabra Complete Hair Bow Creator Kit
• Registration
• Sandy Sandler
• Bowdabra Facts
• Questions to Ask
• Articles and Tips
• High Resolution Images

How to quickly Create a 2 Ribbon Bow with Bowdabra

03Hi everyone, Steph Ackerman sharing how to create a 2 ribbon bow for a wreath.

How to make a 2 ribbon bow with Bowdabra

Bowdabra Bow Making Tool Bowdabra Bow Wire Ribbon Wreath Metal Word

Instructions:

Place Bow Wire in the Bowdabra, placing it underneath while working on the bow.

Place the first ribbon in the channel, twisting as the ribbon goes through the channel. Create a 3 looped bow, each loop a little smaller than the last.

Using a second ribbon, create a smaller bow with two loops.

Wrap the wreath with a different ribbon, overlapping the layers. Using the bow wire, tie the bow to the wreath, placing the roses under the bow. Adhere a metal word to the loops.

Thanks for stopping by.

For more quick and easy DIY tutorials like this 2 ribbon bow,  visit the   Bowdabra blog  each week.  And be sure and like us on  Facebook .  Every Monday at 4:00 p.m. PST, 5:00 p.m. MST, 6:00 p.m. CST, and 7:00 p.m. EST, Bowdabra, will host a Facebook live. There is always something new to make and we take you through the easy steps.  In addition, each week one lucky viewer will receive a special gift!

Bowdabra® Bow Wire – Silver – 200 feet – bow3040-p4-631 (Set of 4)

Bowdabra® Bow Wire – Gold – 200 feet – BOW3030-4P-634 (Set of 4)

Bowdabra® Bow Wire Value Pack – Gold – 100 yards – BOW3050

Bowdabra® Bow Wire Value Pack – Silver – 100 yards – BOW3060

Mini Bowdabra® Bow Making & Design Tool – Small – BOW2100

Hair Bow Tool and Ruler Kit for the Mini Bowdabra® – BOW2200

Bowdabra® Bow Making & Design Tool – Large – BOW1003-Single

Mini Bowdabra® and the Hair Bow Tool and Ruler Kit – BOW2300

Leave a reply cancel reply.

You must be logged in to post a comment.

Follow us on YouTube

2505 Anthem Village Drive, Suite E450, Henderson, NV 89052

• International Shipping
• Terms & Conditions
• Orders and Returns
• Shipping Rates & Policies

Your Account

• Your Wishlist
• Payment Method
• Privacy Policy

Privacy Overview

How to Make a Bow the SUPER EASY Way

By Brooke Riley 10 Comments

Ok guys. Let’s talk BOWS. Mainly, the SUPER easy way of how to make a bow. They can set off any gift or wreath or door hanger or literally ANYTHING. They add that little extra oomph to your project, but soooo many people have no idea how to make them. Guess what? That was ME not even 2 months ago. I had never made bows. I didn’t have a clue what to do. BUT, I knew the style I liked…and I worked around with it until I found a process that worked for me- and I tweaked it along the way until I had it just the way I wanted it.

I can’t tell you how to make those gorgeous loopy bows. I don’t know how. But, I CAN tell you how I make MY bows…and they are super duper easy.

Easy Step-By-Step Instructions on How to Make a Bow

I am basically going to just walk you through my process with pictures. I will actually do a video a little later and try to add it to this blog post too, for reference.

Get all of your ribbon together!

1. start with a “base” for your ribbon bow.

I consider a base either some really thick ribbon of some sort that matches your theme or a very neutral burlap. 99% of the time, I use a neutral color, such as burlap. I lay 2 pieces down and crisscross them. It is up to you how long your ribbon should be, depending on how big you want your bow.

2. Cut strips of ribbon.

Cut strips of ribbon and continue this process until you feel like you have used as much ribbon as you desire!

3. Layer your strips of ribbon.

Mix and match fun colors and designs. It is FUN to make a bow! I like to mix thick, thin, different designs, plain, etc… It gives your bow more fun layers.

4. Secure your ribbons

Once you are done layering your ribbons, take a piece of thin ribbon (maybe 1/2 inch or whatever you want to use) and lay it across the top, like pictured.

Flip the ribbons over and tie the ribbon in the back. Tie it TIGHT so that it really gathers your ribbons.

BOOM! You made a bow! Now, just tweak it and pull the ribbons into place as you want them to lay…and you are DONE!

I told you that it was so easy. Did you believe me that it was literally THIS easy??

FAQs About This Bow Tutorial

What type of ribbon do you use.

Get creative! You can use any style ribbon you like, it does not have to be wired ribbon either. Mix and match patterns and colors to add to everyday crafts, or get festive with seasonal ribbon.

Now, here is my bow hanging on my Santa hat door hanger!

What supplies do I need to make a bow?

We’re all about making things simple and easy here. You’ll just need your favorite ribbons and pair of scissors. You can also use pipe cleaners or zip ties to secure your bows too. Just make sure to cover them up with decorative ribbon or fabric.

Love ribbon crafts?

Take a peek at all of these craft ideas that include some of your gorgeous ribbon supplies.

• diy burlap ribbon flower on canvas
• how to make a reverse canvas Christmas ribbon tree
• wood bead garland with ribbon tassels
• wood block ribbon candy corn
• diy scrap ribbon flag
• diy ribbon wreath

Show me the bows you make in the comments!

Share this post so that all of your friends can learn how to make a bow the SUPER EASY way!!

Related Posts

September 11, 2017 at 10:41 am

Looking good!!

September 11, 2017 at 2:17 pm

That is super easy!!

October 28, 2017 at 8:44 am

Love these bows and how easy they are to make!

October 28, 2017 at 2:24 pm

That’s fabulous!!!

June 4, 2018 at 7:12 pm

Just found your site. Can’t Waite to see all you make. Ands give it a try.

June 5, 2018 at 5:47 pm

WOW what a great bow and no loops! Going to have to give this a try!???

October 28, 2018 at 6:44 am

This I can do! Thank you! <3

October 28, 2018 at 12:05 pm

This is great! Love simple & easy! Thanks for sharing with everyone. “I Love Your Ideas”.

April 14, 2019 at 6:43 pm

Would like to know the length of the ribbons please

[…] am not a bow maker, by any means.  My go to bow making is from my friend Brooke at Re-Fabbed.  Super cute AND super easy!  […]

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of follow-up comments by email.

Notify me of new posts by email.

How To Make A Big Bow Out Of Ribbon – 7 DIY Ideas

Remember when the first time you tied your shoelace before going to school, and everyone was proud? Well, after all these years, you are again stuck in the same situation. No, don’t get me wrong. I’m not saying you have forgotten to tie your shoelaces, but now it’s time you learn how to make a big bow out of ribbon.

Like a cherry on top, a bow can also make your gift look exquisite at a party. If you are going to a wedding invitation or a friend’s birthday party, bows can add an extra spark to your gifts. In this article, we will share a few tricks to know how to make a big bow out of ribbon. 

How To Make A Big Bow Out Of Ribbon?

Many people don’t know how to tie a bow with ribbon, and that’s why they simply tie a ribbon on a gift. But that looks exceptionally dull, doesn’t it? Some people also pay the shopkeepers to wrap the gift and tie a bow on it. But there’s a different joy in gift wrapping and tying a bow on the top. So, if you want to know how to make a bow, it’s time you focus on these tips. 

1: How To Tie A Bow With Wired Ribbon?

We are starting our lesson on how to make a big bow out of ribbon with a creative one. Making a bow with a wired ribbon is easy because the wire inside the ribbon gives a firm texture to the ribbon. So, when you make the bow, it doesn’t open up easily. 

What You need

• Wired Ribbon
• Pipe Cleaner
• Take a ribbon of approx 36 inches in length, and make a loop at the end. Just fold one side over another, and keep your thumb at the center to make the loop.
• Create another loop in the same process beneath the center loop. Now, repeat the process, and continue making several loops, one bigger than another.
• When you are done with a few loops, make a final one. Make sure it is the biggest loop. Trim the bow closer to the center of your circle.
• Tuck the edge of the ribbon beneath the final loop. Now, insert a pipe cleaner in the center loop to make all the circles come together.
• Cut the tail of your final loop to give it two ends.
• Finally, fluff the loops from all sides so that it looks voluminous and fluffy.

Also Read: Top 7 Best Japanese Restaurant Of The World – 2021 Best Guide

2: How To Make A Floral Ribbon Bow?

If you want to know how to make a bow out of ribbon, you must learn how to make a floral bow. A floral bow looks pretty, and it can embellish many dull-looking things. So, let’s get on with it.

What You Need

• Firstly, cut two pieces of ribbon. One should be of short length, and the other should be a bit longer.
• Create a loop at the end of the longer loop by folding one part over another, and twist it.
• Now, hold the twist, on the one hand, make another loop on the opposite side, and twist it. 
• Keep on repeating this step until and unless you get your preferred size of the bow. But, make sure you have some hanging ribbons left to make the tails.
• Now, use the shorter ribbon to tie all the loops. Bind the know at one end, and double knot it so that it doesn’t open up.
• Trim the edges of the tails a little, and fluff it up.

3: How To Make A Grosgrain Ribbon Bow?

If you want to know how to make a big bow out of ribbon, make sure you learn to make a grosgrain bow. It is one of the most creative ways to tie a bow, so make sure you know it.

• Grosgrain ribbon
• Cut 2 meters of grosgrain ribbon after measuring the length. 
• Wrap it around a box, and use glue to hold the ribbon, and the box together. 
• Now, make a loop at the center. Keep your finger in the middle, and make another loop. Keep on joining it in the center with glue.
• Make three more loops, and bring them all around the center. Join the loops at the center with glue, and your grosgrain bow is finished.

Also Read: Top 7 Best Vertical Farming Companies In The World – 2021 Updates

4: How To Make Holiday Paper Bows?

Not all the bows you are going to make will be enormous. So, the best way to know how to make a big bow out of ribbon is to use holiday paper. 

• Holiday paper
• When you have the holiday paper, cut them into three sections. Make three ribbons of 1″x12″ size, three stripes of 1″x10″ size, and three ribbons of 1″x5″ size.
• Now fold one end of a ribbon on the top, and fold another end on the bottom. Keep on repeating the step for all nine strips.
• Staple all the ribbons with one another and staple the center.
• Now, assemble the larger ribbons, and collect the smaller ribbons together.
• Place them on top of each other, and join them in the center loop to finish the bow.

5: How To Make Tissue Paper Bows?

To all my eco-friendly buddies out there, we have an idea to make tissue paper bows. If you want to know how to make a big bow out of ribbon, make the tissue paper bows because they are big.

• Coloring tissue paper
• Twine/ribbon
• Open an extended length of tissue paper, and scrunch it to make a thin strip out of it.
• Wrap the two sides in the middle, and overlap the edges. It will give the bow a natural look of a loop.
• Wrap a tape around the center because it will secure both sides.
• Now, fluff the outer loops, and keep on doing it until you like the shape of the bow.
• Once you are satisfied with the look, wrap a twine/ribbon around the center to finish the bow.

Also Read: 7 Best Local Businesses Through Which You Can Earn Money In 2021

6: How To Make A Duct Tape Bow?

Did you know you can make a bow out of duct tape? We have another unique idea for you. So, learn how to make a bow out of ribbon in this special way.

• Glittery duct tape
• Cutting mat
• Rotary cutter
• Trim the tissue paper with a rotary cutter, and tie it around the glitter tape.
• Fold the glitter duct tapes in half so that the glittery side stays on top.
• Press the center of the folded strip to mark the middle.
• Now, use another technique to fold the duct tape and use the sticky ends to create the loop this time.
• Take another strip, and cut it in half.
• Wrap the strip around the center, and cut the edges.
• Secure the bow with the exposed tape, and your glittery bow is ready.

Also Read: 7 Best Gifts For Farmers – Gift Ideas For Farmers In 2021

7: How To Make A Burlap Bow?

Yes, a burlap bow is a final addition to our ‘how to make a big bow out of ribbon’ lesson. So, let’s get on with the supplies and the steps.

• Burlap ribbon
• Cut 4 strips from the burlap ribbon. Two of them should be 18 inches, one should be 1 inch, and the last should be 4 inches. 
• Create two circles using one long piece and one medium. Now sew them in the middle so that they stay together.
• Keep the small circle on top of the large circle, and sew them again in the middle.
• Fold the ribbon in the middle to give it a fluffy look on the sides.
• Take your shortest piece, and add it as the tail of the bow. Then, cut it from the middle to create two ends. Sew it again to affix it to the bow.
• Trim the edges of the tail, and cut them diagonally. 

Frequently Asked Questions [FAQs]

If you think we have given you some good tips on how to tie a bow with ribbon, you can ignore this section. But, we have still curated a few questions for you to understand the ribbon-making concept even better.

1: How Much Ribbon Is Needed To Make A Bow?

Ans: You will require approx 4 yards of ribbon to make the bow, and another 4 yards to fit the bow around your gift package . If you plan to use a florist wire, you may need one of 4 inches of size. Cut the wire before you start making your bow, and keep a length that you can reach.

2: How Many Loops Should A Wreath Bow Have?

Ans: The more loops you will make in a bow, the bigger, and fluffier it will look. But, if you want to make a perfect wreath bow, it should include a maximum of six loops. You must also have two tails hanging even if their lengths are different.

3: Where Do You Put The Bow On A Wreath?

Ans: Ideally, you must put the bow on the top of the wreath, or on the bottom of the wreath. If your bow has short curls, it will look better when it is on top. But, if it has longer curls, it will look better when it’s on the bottom. 

Final Thoughts

You must be an expert by now on how to make a big bow out of ribbon, right? We have given you some pretty crafty ideas to get on with this bow-making journey. Now, apply any of these ideas, and start creating those beautiful-looking bows for your next occasion. If you want to know anything more about how to tie a bow, please let us know in the comment box.

• Top 7 Haunted Abandoned House Around The World – Just check It!
• Top 7 Bodyweight Back Exercises For A Strong Upper Body
• Top 7 Famous Female Entrepreneurs Of 2021

What's your reaction?

Top 7 small business ideas for the small investor in 2021, 7 best wine for beginners that they can try safely – check it out, you may also like.

The Artistry Behind Creating Iconic Designer Gowns

Seaside Glamour: 7 Trendy Swimwear To Embrace Australian Spirit

7 Key Factors To Consider While Planning An International Relocation

7 Tips To Choose A Partner That Helps You Relocate To Auckland

Leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Recent Posts

7 Best Places To See Cherry Blossom Trees All Around The World

What Is The Difference Between Veneer And Laminate?

Revving Up Your Metabolism: A Comprehensive Guide To Enhancing Weight Loss With Ozempic

Sleep In Style: Discover 7 Latest Trends In Bedding Sets

Stay connected, popular posts.

How To Not Be A Dry Texter? 7 Important Tips To Avoid Boring

7 Best Local Businesses To Make Money In 2021

7 Health Benefits Of Superman Pull Up  – How It Can Help You Stay Fit In Summer? [Updated 2022]

• Advertising
• Entrepreneurship
• Real Estate
• Small Business
• Make Money Online
• Photography
• Family & Parenting
• Health & Fitness
• Home & Garden
• Job & Career
• Pets & Animals
• Relationship
• Dev & Design
• Programming
• Social Media

Latest Posts

Why australia’s franchise landscape is attracting global investors: a closer look at the best opportunities, popular tags.

How To Make a Bow Out of Ribbon: 34 Awesome DIY Bow Ideas

Updated on October 13, 2022

Tying up a bow is not something that anyone can do, since you need a certain amount of dexterity, the right materials, and the right inspiration. While some can create elaborate and perfectly-formed bows with their eyes closed, others need a little help getting started.

The purpose of today’s article is to provide inspiration for those who want to start making their own bows. We’ve compiled a list of the best DIY bow ideas we could find, from simple ribbon bows to more complex designs.

What are some creative ideas for making a bow?

We’ve compiled a list of 34 creative ideas for making a bow, so feel free to try out a few and see which ones you like the best.

1. Pink ribbon bow

A pink ribbon bow is timeless for any occasion. This elegant yet simple design relies on using several types of pink ribbon, thread, and glue. A pink ribbon bow is ideal if you prefer a rich and vivid bow to wrap a present, create a hanging wreath, or accessorize an outfit. Check out our tutorial for a DIY pink ribbon bow to get the instructions and list of materials.

2. Christmas bow ornament

A Christmas bow ornament is a wonderfully festive idea that the entire family can enjoy. This design uses a red ribbon with black felt and silver foam paper that looks like the belt of Santa Claus. A Christmas ornament in the shape of a bow is a great seasonal gift since it can be hung up on a Christmas tree and reused year. Find out more in our full guide for making a Christmas bow ornament .

2. Festive ribbon bow with long tails

A festive bow with long tails is a great way to spruce up the front door for Thanksgiving, Christmas, or other special occasions. Long tails make gorgeous bows, but they can be difficult to achieve. A simple way to decorate a festive bow with long tails is described in this guide from Clean & Scentsible , which uses glittered wire ribbon.

A bat bow is a fantastic idea to celebrate Halloween if you feel like decorating your home or making your own spooky costume. For instance, you can attach several bat bows to a family room wall. To learn how to make a bat bow, go to DIY in the Forest . All you need is faux leather, a glue gun, scissors, and a hair clip.

5. Simple red bow

A simple red bow is a stylish way to wrap last-minute presents. And you can use any leftover ribbon you make a simple red bow, as described by Pebbles Inc. Blog . The bow tutorial is part of a larger post about making back-to-school cards, but you can also use it for other purposes, like gift wrapping.

6. Fabric ribbon bow

Fabric ribbon bows have a certain classic charm. And this design from Treasurie uses strips of fabric to create a bow that’s both stylish and easy to make. Check out the tutorial to find out more. You can choose any color or pattern of fabric you like, but since the bow is relatively big, we recommend bold colors and patterns to make it stand out.

7. Hair bows

Hair bows are popular with young girls and teens alike. Hair bows are a great way to add a touch of personality and style to your hair, and they can be made from all sorts of different materials, including fabric, leather, or wired glitter ribbon.

This hair bow design from The Girl Inspired uses fabric and can be attached to the hair with the help of a metal single-prong clip, so be sure to check out the tutorial if you’re interested.

8. Perfect bow with long tails

A perfect bow with long tails is symmetrical and can be made with minimal effort, without any thread or glue. A perfect bow with long tails is trickier to pull off due to the skill required, but it can be masted with practice.

If you want to learn how to make a perfect bow with long tails, read the step-by-step tutorial from Evermine .

9. Simple paper bow with free template

A simple paper bow design is the best solution for DIY bows without fabric, ribbons, or leather. Only paper is necessary, and you don’t need a lot of paper since there’s little folding and cutting involved.

The folks at Gathering Beauty have a great step-by-step guide that shows you exactly how to make an elementary paper bow, which also includes downloadable cutout templates.

10. Buffalo check ribbon bow

A buffalo check ribbon bow is ideal for people that want to make bows that feel unique, thanks to the interesting checkerboard patterns. The buffalo check ribbon bow uses a combination of colors and patterns that are both eye-catching and festive.

If you’re interested in learning how to make this bow, then check out the original blog post from Living Locurto .

11. Ribbon bow with various materials

A ribbon bow with various materials is great when you have plenty of leftover fabric that you were planning on throwing away. For example, this ribbon bow with various materials from Re-Fabbed uses silk ribbon, regular burlap ribbon, and mesh ribbon strips, all of which have different widths, colors, and patterns. You can improvise using whatever materials you have on hand, just as long as you’re creative.

12. Tulle bow

Tulle bows are easy to make since you don’t have to pay as much attention to the knot as the regular ribbon bows; all you need is to make them look as fluffy as possible.

Tulle bows are great for all occasions, from baby showers to weddings.

This tulle bow tutorial comes from Satsuma Designs and it’s a great starter tutorial for those that have never worked with tulle before.

13. Fancy gift bow

A fancy gift bow is always a good idea, especially if your goal is to make presents look more luxurious.

We found this design on Charlet’s Website , and all you’ll need will be a glossy paper ribbon with a red Christmas pattern on one side and silver on the other. The secret to this gift bow’s unique design lies in folding and gluing the ribbon in a certain way so that the two sides are visible, all while giving it a distinct floral shape.

14. Loopy puff bow

A loopy puff bow is made by sewing tens of loops together at the center, unlike common bows made by creating a fancy knot on a piece of ribbon.

We found a great loopy puff bow tutorial at The Ribbon Retreat which uses four types of thin grosgrain featuring the U.S. flag’s pattern.

15. Seuss-inspired bow

A Seuss-inspired bow is what every Dr. Seuss fan needs, and it’s not as difficult to make as it looks.

This design comes from Occasionally Crafty , and it’s just like the loopy puff bow mentioned above, except that it uses Seussian colors (combinations of white, red, and cyan). The combination of colors will make your bow look like it came straight out of a Dr. Seuss illustrated book.

16. Satin ribbon dahlia

A satin ribbon dahlia is a perfect way to add a touch of elegance to any present. This is yet another bow design from The Ribbon Retreat and the way you make it is very similar to how you’d make a DIY hair scrunchie. However, there are a few extra steps that involve folding and cutting the ribbon in a certain way, and then gluing a neat costume gem in the center.

17. Burlap bow

A burlap bow has a certain rustic appeal to it that many will appreciate. This design uses 4 strips of burlap of different lengths, and unlike traditional bows, there are no knots or loops involved, just a bit of glue.

This bow idea from Mommy Suite is perfect for classic wreaths, garlands, and other decorations that would look great with a bit of country charm.

18. Pinwheel bow with a Sally’s clip

A pinwheel bow with a Sall y’s clip is a great DIY project since it lets you test out your creativity. Unlike other bows that start taking shape as you craft them, this pinwheel bow with a Sally’s clip doesn’t look like a bow until the very last step when you pull on a thread to crease the center.

The people at Make Bows & More wrote a complete tutorial on how to make the pinwheel bow with a Sally’s clip, and they’ve included detailed instructions and illustrations.

19. Curly paper bow

A curly paper bow is something almost everyone has seen on presents. The secret behind making this curly paper bow is knowing how to curl long strips of paper using a pair of scissors. You then finish by gluing the curls together in the middle.

We found a great tutorial for a curly paper bow at Two Yellow Birds Decor . They look fun, and they’re a lot easier to make than you may think.

20. Origami bow

An origami bow is a great way of showcasing your paper folding skills. The origami bow looks original, and unlike typical paper bows, where you use one long and thin strip of paper, this bow is made out of just one square piece of paper.

This design comes from Instructables and is great for beginners since it also lets you cheat and use a pair of scissors.

21. Wired ribbon bow

A wired ribbon bow is perfect if you want to make a sturdy bow that doesn’t lose its shape.

This particular bow design from Francois et Moi . uses a combination of regular gold ribbon and gold wire ribbon, so it’s perfect if you’re looking for that regal look. Wired ribbon is very malleable, so it’s perfect if your project requires that the fabric stays in a certain shape or position.

22. Colorful accordion bow

These colorful accordion bows are a good starter DIY project, especially if you’re not advanced enough for origami. You can learn how to make these colorful accordion bows at Gold Standard Workshop .

Accordion bows are perfect for wreaths, garlands, or other decorations that could use a pop of color. Besides, since you don’t need to use sharp scissors, kids can also help with this project.

23. Tissue paper bow

A tissue paper bow may not look as neat and elegant as other bows, but they’re a great way to start practicing your crafting skills.

This tutorial from 100 Directions explains everything you need to do to craft a tissue paper bow. You’ll need colored or patterned tissue paper sheets, a glue stick, and some twine.

24. Crepe paper bow

This crepe paper bow is great for people that lack dexterity. Since crepe paper doesn’t develop fold marks as easily as regular paper, you don’t have to be as careful when making creases and folds. The only downside is that crepe paper can be quite pricey, so this may not be the best option if you’re on a tight budget.

wikiHow has a great tutorial that teaches you how to make crepe paper bows, and they even made sure to include two different bow designs.

25. Duck Glitter tape bow

A Duck Glitter tape bow wins extra points for both originality and final looks. All you need is to cut a strip of Duck Glitter tape , roll it into a loop, and then press it down the middle to create that signature bow shape.

Persia Lou detailed how you can make this bow, and Duck Tape is perfect for these kinds of projects since it comes in various colors and textures, such as gold or silver, glittered, or with a smooth metallic sheen.

26. Leather hair bow

A leather hair bow may be difficult to craft at first, but leather is a crafting material that’s become increasingly popular in recent years.

This particular bow design comes from Tinsel & Wheat , and it uses three leather strips glued and stitched together in the middle. Since leather is naturally sturdy and rigid, these bows keep their shape very well.

27. Leather gift bow

To make a leather gift bow you’ll need seven leather strips that you’ll fold into loops and then overlap in the middle to create that trademark bow shape. A leather gift bow combines the visual appeal of a regular gift bow with the elegance resulting from using leather.

You can find detailed instructions and illustrations for making this leather gift bow on Crafts Pilot .

28. Messy denim bow

A messy denim bow is always a good idea if you have a pair of old denim jeans you used to love that you can’t seem to part with.

For this messy denim bow tutorial from Southern Crush at Home all you’ll need is some old jeans, a pair of tailor’s scissors, some zip ties, and some rhinestone embellishments.

This messy denim bow is certainly a unique idea, and it’s great for decorating your other denim clothes.

29. No-sew messy lace bow

A no-sew messy lace bow is yet another great idea if you’re a big fan of messy bows.

You’ll need the exact same materials as with the previously mentioned messy lace bow, but instead of strips of denim, you’ll need lace. Since lace is the base material, this bow is better suited for more delicate and feminine projects, such as wedding invitations.

Southern Crush at Home wrote an entire guide detailing how to make this no-sew messy lace bow, so give it a read.

30. Measuring tape bow

This measuring tape bow is the perfect gift idea if you’re planning to celebrate someone in your life that loves spending time in the garage or working on DIY projects.

This measuring tape bow tutorial from Tikkido shows you how to put it all together. You’ll require a lot of unconventional materials, such as measuring tape, screws, nails, and even washers.

31. Modern paper flower bow

A modern paper flower bow is the perfect fit for any person that loves futuristic and minimalist designs.

Everything there is to know about making this bow can be found on Maritza Lisa’s website. The original article recommends using a Silhouette cutting machine to cut the paper strips since not everyone is confident enough in their cutting skills to achieve such precise results.

32. Crochet bow

A crochet bow is the epitome of DIY or homemade projects. Everything Etsy has put together a very detailed tutorial that you can follow.

You can use any type of yarn you want and add some embellishments like beads or sequins to make your crochet bows more unique. Admittedly, you’ll need to know some crocheting to make these crochet bows, but only the basics.

33. Large decorative bow

Large decorative bows are for people who like decorative objects that make loud and bold statements. What makes this large decorative bow so special is that it seems even bigger and puffier since the ribbon you’ll use to make it is extra wide.

The original article from In Love with Art details the process of making this bow step by step, but you’ll need Google Translate’s help since the website is in Croatian.

34. Sprinkle bow

Cute sprinkle bows combine two things that kids love most: bows and sprinkles. Sprinkle bows are just like regular paper bows, except that you need to decorate the center with sprinkles, so they are ideal decorative elements on birthday cakes and presents.

You can find the full instructions on how to make a sprinkle bow over at Design Eat Repeat . They also included some downloadable templates that you can use.

Many people can feel overwhelmed when they think about all the different types of bows and how to make them. But after reading this guide, you now know that there are many different types of bows, and each one has its own unique purpose.

You also know that you don’t need to be an expert crafter to create most of these bows. With a little bit of time and patience, you can make any of the bows on this list.

So what are you waiting for? Get started on your next DIY project today!

Your daily dose of crafts, recipes, beauty, fashion, living tips and home guides.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• EDIT Edit this Article
• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• Browse Articles
• Learn Something New
• Quizzes New
• This Or That Game New
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Personal Care and Style
• Fashion Accessories
• Hair Accessories Projects

How to Make a Bow with Wired Ribbon

Last Updated: January 28, 2023

This article was co-authored by Amy Guerrero . Amy Guerrero is an Arts and Crafts Specialist and the Owner of Sunshine Craft Co., a crafting studio based in Phoenix, Arizona. Amy specializes in macrame, DIY crafting, and teaching fiber arts. She offers monthly in-person and online workshops along with having developed a range of DIY craft kits for at-home projects. Amy holds a BS in Industrial Design from Philadelphia University. She worked as a graphic designer before starting her own business. Sunshine Craft Co. is a creative hub that offers a wide range of workshops, tools, and resources for any craft project to inspire creativity and community engagement. This article has been viewed 217,379 times.

Wired ribbon can be tricky to work with because it does not behave the same way regular ribbon does. Once you know how to handle it, however, you can use it to make beautiful bows, perfect for wreaths, garlands, floral arrangements, and other decorations. You can even experiment with your own variations by adding tails or additional loops.

Making a Basic Bow

• You can cut the tail ends at angles or into notches.

Making a Looped Bow

• Keep your thumb inside the tube, and your forefinger behind the overlapping ribbon.
• This method will make a looped bow, like the kind used on floral arrangements and wreaths.

• The thin wire that florists use will work the best here. You could also use a pipe cleaner that matches your ribbon's color.

• Give the ribbon tails a nicer touch by cutting them at angles or into notches.

Making a Fancy Bow

• You can also use a CD or DVD case, or even a scrap of cardboard.

• The thin wire that florists use would work great for this. Another option would be one of those twist ties used on trash bags.

• Cut the ends of the ribbon into notches or angles for a nicer touch.

Making a Rose-Shaped Bow

• Discard the wire you pulled out or save it for another project.
• For 1 to 2-inch (2.54 to 5.08-centimeter) wide ribbon, plan on using 1 yard (91.44 centimeters) of ribbon. If your ribbon is thinner, you could try using less.

Expert Q&A

Video . by using this service, some information may be shared with youtube..

• If you will be tying the bow onto a wreath or garland, don't cut as much of the wire off; leave a few inches hanging off. Thanks Helpful 0 Not Helpful 0
• You can secure smaller bows to gifts with double-sided tape. You can also leave some of the excess wire on, and tape that to the gift. Thanks Helpful 0 Not Helpful 0
• Choose colors and patterns that go with the season. Warm, earthy colors work great for Fall. Bright colors work better for summer. Thanks Helpful 0 Not Helpful 0

Things You'll Need

• Wired ribbon
• Thin florists wire
• Sharp scissors
• Wire cutters
• 1 yard (91.44 centimeters) wired ribbon

You Might Also Like

• ↑ http://inmyownstyle.com/2014/12/3-ways-make-bow.html
• ↑ http://www.thriftyfun.com/Making-a-Wire-Edged-Ribbon-Bow.html
• ↑ https://diyprojects.com/how-to-tie-a-bow-with-ribbon/

About This Article

To make a basic bow with wired ribbon, cut a length of ribbon and find the center. Make 2 loops on either side of the center point, making sure that both loops are pointing up. Cross the loops over each other, then under each other to make a knot in the middle. Gently tug on the loops to tighten the knot. Keep pulling and tugging the loops and tail ends of the bow to adjust their size and shape. If you like, trim notches into the ends of the tails to make them look more elegant. To learn how to make a rose-shaped bow using wired ribbon, read on! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Shirley Kirby

Aug 30, 2019

Did this article help you?

Betty McLeod

Aug 8, 2021

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Don’t miss out! Sign up for

wikiHow’s newsletter